Main functions and features
Anti-over travel
Every time the first power-on operation, the gate will be slow to the limit, to prevent inertia out of the limit. When the door reaches the travel limit, it can only press the button in the opposite direction, so that the motor can move to prevent it from rushing out of the limit. If the limit magnet is damaged or fails out of the limit, it will automatically encounter resistance to protect the motor and control main board.
Note: When the door is out of the limit, there is a power off protection function, and
it can only move in the opposite direction after powering on.
Co-op Mode Available
Two motors with the same type of control board on each can work synchronously. In this mode, infrared, loop, auto- close and other functions are synchronized.
Motor running time protection
Avoid motor running for a long time in stroke failure. After the control main board learns the stroke, the longest running time of the motor will be increased for a period of time on the basis of the stroke time to avoid the long running time of the motor.
Automatic door closing function
The waiting time of the automatic door closing function can be adjusted according to the needs of the use, in the range of 1 to 250 seconds.
Soft start and soft stop function
The slow speed strength and slow speed distance of the motor can be adjusted by potentiometer. Adjust the speed and distance of the motor when it enters the slow speed.
Resistance rebound function
When the gate is blocked, the gate can be switched in two ways: stop and rebound. The gate will stop immediately if the door is blocked.
Bluetooth control module
Original on-board Bluetooth module slot design, suitable for independent Bluetooth
module (optional).
One-click matching Internet gating
The control main board can be directly matched to the Internet controller/camera without adding any wiring equipment.
Technical specifications
| Model |
BG3500 |
| Capacity |
3500 KG |
| Torque |
80 N.M |
| Input Voltage |
AC220V/110V ± 10% |
| Output Voltage |
DC 36V |
| Motor Speed |
1600 rpm |
| Gate Speed |
12 m/min |
| Fuse |
DC 40A |
| Remote Control Range |
Open Space 30~90 Meters |
| Temperature |
-30℃~+65℃ |
| Relative Humidity |
<60°C |
| Limit Switch |
Spring/Magnetic |
| Noise |
≤60 dB |
| Protection Class |
IP 65 |
| Certification |
CCC, CE |
| Module of Output Shaft Gear |
Module 4/ 19-Tooth Gear |
| Output Shaft Gear Diameter |
84mm |
Packing details
| Packaging Materials |
Foam inside, carton outside |
| Package Dimension |
48.5*41.5*37 cm |
| N.W. |
25.5KG |
| G.W. |
26KG |
| Delivery Methods |
By sea
By air
By express (UPS, DHL, FedEx, TNT, special line express, etc.)
|
Safety Protection and Precautions
1. For your personal safety, please follow the installation instructions carefully. Incorrect installation or improper use of the product may cause serious damage to people and/or property.
2. Keep the Manual properly for future use.
3. We will accept no responsibility for any consequences resulting from inappropriate use of the machine or from use beyond the specified purposes.
4. Do not install the machine in the area where there are inflammable and explosive dangerous goods or a lot of smoke to avoid serious safety accidents.
5. We will accept no responsibility for any problem incurred due to neglect of the process requirements of precision components or due to deformation of such components during the installation.
6. Before system overhaul, cut off the power and check if the grounding system is correct and reliable.
7. We will accept no responsibility for any safety problem or operation failure caused by the use of any component not produced by us.
8. Do not make any change to the components of the system.
9. The installer must explain in detail to the user the operating rules of the machine and relevant regulations in case of an emergency, and provide the user with the Manual.
10.Keep children and other unauthorized persons away from the installation site and make sure there is no risk factor existing in the vicinity of the installation site.
11.Keep the remote control out of the reach of children. Failure to do so may incur accident to children.
12.Don’t try to repair or adjust the system by yourself. Contact professionals instead.
13.Check the installation, especially the cables, springs, and fittings for signs of wear, damage, or imbalance. Do not use if repairs or adjustments are needed, as faulty installation or improper door balance may cause injury.
|
|
3500KG Heavy Duty DC 36V Motor Large Tonnage Electric Automatic Door Opener Images
|
